Showing posts with label TTCombat. Show all posts
Showing posts with label TTCombat. Show all posts

Friday, January 10, 2020

Painting Challenge Italian Wars Terrain


Another post from the Painting Challenge as I stop off at Cook's Crevasse where posts have to have a geological theme to them.






I'm a little nervous about this as I've taken a geology course before and I know that Dr. Cook is pretty hard-a**ed (From DaveD - yes but weirdly he seems to allergic to sand - some geologist!- don’t ask ). I have two pieces of terrain made from stone for my Italian Wars project.  These are 28mm and made by TTCombat.




First up is a house.  Wikipedia tells me that period buildings in Tuscany use a mix of sandstone and limestone, which in this case have been covered over with some stucco work.  I like the details that TTC puts into its products, the curved porch, louvered windows and the tiled roofing.  One of the louvers fell out of one window set during construction.  I could have ruled it back but left the window blank to give the impression of a Medici, Borgia or Sforza plotting in the shadows out of sight.  




Next we have a stepped bridge.  I like that the steps have been left wide enough to hold stands of figures and once again the detailing is nice.  I tried to give the compass rose in the middle span the impression of inlaid marbles in white, black and blue/grey.  On table we'll have to figure out how vehicles and gun crews navigate the steps.  



As with my first TTC house, I used a basic wash technique mostly using raw sienna, raw umber and burnt umber, all of which are based on the earth pigments used in Renaissance Italy for a further geological link.



There's also an economics lesson in this post.  I picked all three of the TTC pieces in Meeplemart in Toronto along with some stuff for Curt.  My three buildings came to less than the two sets of GW dice that Curt asked me to pick up.  I like to tease Curt that I don't require that my dice pass though the intestines of a civet cat.

These two pieces pretty much fill a 6" cubic unit so that's 20 points for the models and 30 for Cook's Crevasse, assuming Dr Cook gives me passing grade.  My progress across Challenge Island is plotted on the map below.  Next up I'll likely be taking a balloon ride across to the western coast.




Also when Curt first posted about the Island, I commented that the stops looks like merit badges from my boy scout days.  I've decided that I'll note my progress in terms of badges earned too.

Me circa 1976.  My gaming activities included first edition D&D, Avalon Hill board games and badly painted Airfix Nappys in Humbrol enamels. 

Wednesday, January 1, 2020

TTCombat Italian House


The annual madness that is the Painting Challenge is up and running.  First post for me is a BUA for my Italian Wars project in 28mm.  This piece is from TTCombat and I picked it up at Meeplemart during a trip to Toronto the Centre of the Universe last fall.  




This was my first kit from TTC and I was quite pleased with it.  TTC uses a heavy pdf than Sarissa or Warbases and it required a bit of work with the Xacto to trim the pieces from the frame and to make sure than Tab A fit in Slot B securely.  As such there are some gaps on this first effort that hopefully will be rectified on further efforts.  Paint work is very basic, I left the pdf and greyboard unprimed and used washes in various earth tones.




As can be seen TTC provide some interior details but I chose not to paint the interiors.  I glued the two floors together but left the roof as lift off, but the upper story could be left in lift off state as well.  This would be useful in skirmish gaming.




This kit (plus two other on the workbench) come from TTC' Streets of Venice range which is worth checking out.  The structures would be useful for many historical periods plus fantasy gaming.  Although labelled for Venice I think it will do for any Italian locale.  I was quite pleased when I showed this to my wife (who unlike me has been to Tuscany) who said it looked like Sienna.  



Points wise the building is 6" tall, 6"long and 3" wide.  That's a perfect demi-cube and an easy to calculate 10 points.